This book deals with the process of choosing and using a milling machine and its accessories. In addition to the machine itself, the accessories include the cutters, cutter chucks, workpiece clamps, vices, angle plates, dividing heads, rotary tables, boring heads and other minor items.
The content is divided into three main sections. Firstly, it describes what machines and accessories are available and covering each one in detail. The author explains which are essential and which can be obtained when the workshop activity eventually demands one. There are also suggestions on how the equipment chosen should be installed.
The usage of each machine and accessory is covered for all but their most complex uses. Typically, using the rotary table and the dividing head are both described to a detail sufficient for the majority of uses that will surface in the home workshop.
The third section deals with the actual machining process, covering the choice of the cutter for the task in hand, the speeds to use and how the direction of the feed relative to the cutter rotation is vitally important. A less-understood feature of milling, back cutting, is also explained. The subject of sharpening milling tools is briefly covered and a simple off hand grinder fixture that will bring new life to a used end mill is described.
Contents: Choosing the Machine; Cutters; Cutter Holding Devices; Mehtod for Securing the Workpiece; Essential Accessories; Installation; Using the Machine; Getting Started; Using the Vice; Using the Angle Plate; Using the Worktable; Using a Divided Head; Using a Rotary Table; Using other Accessories; Positioning the Workpiece; Machining; Making the First Cut; Maintaining your Cutters; Final Comments.
Harold Hall was for a number of years the editor of Model Engineers’ Workshop magazine and through its pages, he established himself as a mentor to tyro model engineers worldwide. He is the author of seven books in the indispensable Workshop Practice Series and lives in the Hertfordshire countryside.
Harold commenced an industrial apprenticeship in 1950 at the age of sixteen and worked as an electrical control systems engineer for thirty-five years before becoming editor of Model Engineer’s Workshop magazine in 1991. Following retirement in 1995, he has continued to contribute metalworking articles to almost every issue of the magazine published since then. His crafting hobbies extend beyond model engineering to cabinet making, modelling, marquetry and pencil sketching.
Published by Special Interest Model Books in 2011
210 x 148 mm
154 colour photographs
35 scale plans & line drawings